KONICA MINOLTA FIERY S300 31C-M DRIVER FOR WINDOWS 10

Legal NoticeThis document is designed as a diagnostic tool, primarily for Konica Minolta's support personnel, and authorizedservice representatives.

Konica Minolta recommends that all service be performed by an authorized servicerepresentative. Users are responsible for seeking advice of a Konica Minolta authorized service representativeregarding the information, opinion, advice or content of this document. Some solutions may contain hyperlink references which originallycontained links to graphic or text files.

Office Equipment & Supplies eBay

Whining noise from the polygon motor of the write units is normal when operating. This will slow down first out copy time slightly. Access Konica Minolta Fiery S300 31C-M 25 mode. Select Software SW setting. Set dipswitches and both to 1 and exit. The ADU rail mounting screws are loose.

The problem has been reported to occur most often with the right side rail. Tighten the rail screws. Application of a thread adhesive to lock the screws will prevent a recurrence.

System code firmware bug. Install the attached 1-G1R12 patch for system code version 1.

Ebook List

This patch is also available via the Konica Minolta Download Selector. Please refer to attached ReadMe file prior to patch installation.

This feature is support be system software version 2. System code on the controller is corrupt. Reload system code on the controller. The latest version firmware or system software is available via the Konica Minolta Download Selector.

If theoption is in the driver then the PPD is already in use. Check for the installation of the composite patch on the configuration page. If missing then download viathe Konica Minolta Download Selector and install following the instructionin the attached Release Notes. Adobe Reader can be downloaded Konica Minolta Fiery S300 31C-M free from the Adobe web site at: Tension on the cleaning web is too tightand the metal tension spring on the cleaning web supply rollermay beseized to the metal roller.

The web unit fails toturn causing rotational wear to the upper fuser roller. These areas on the rolleraccumulate toner. This appears to occur more frequently in lightly used machines where the web does not rotate for longer periods. Relieve the tension on the fuser cleaning web spring andapply a lubricant fuser oil or high temp grease would be suitable to the fuser web supply roller shaftand spring.

Manual de soluciones Bizhub c500

As a suggestion, apply lubrication to new webunits upon installation to prevent this problem. Clean the upper fuser roller.

Please refer to attachedpages from Fixing Unit section of the Parts Manual. Adobe Reader can be downloaded for free from theAdobe web site at: Incorrect paper tray settings. Please make sure the paper tray is set to the correct weight range of the paper. Failed cleaning web motor. This motor will turn very slowly.

Rear locking screws for the drum cleaner blade were not removed during machine setup or drum unit replacement of one or more units. Ensure that the front and rear locking screws for the drum cleaner blade are Konica Minolta Fiery S300 31C-M during machine setup. Cleaning the waste toner in the auger from the cleaning unit for that color drum unit cantemporarily resolvethe copy quality.

The roller driving belt forthat color drum unit is damaged missing teeth on the belt. Little or no Center Erasure. To enable Fold Erasure, perform the following: Free Download Konica Minolta Fiery S 31C-M (Printer / Scanner). Fiery E10 C-KM PCLeu, LPTENUM\EFIFIERY_E10_CF3, Search the Fiery S 31C-M PCL v eu, LPTENUM\, Search the drivers.