GIGABYTE GA-880G-USB3 EASY ENERGY SAVER DRIVER DETAILS:
|File Size:||29.7 MB|
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* (*Free Registration Required)|
GIGABYTE GA-880G-USB3 EASY ENERGY SAVER DRIVER
Failure to do so may cause damage to the motherboard. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate Gigabyte GA-880G-USB3 Easy Energy Saver may be lost. You may clear the CMOS values by removing the battery: Turn off your computer and unplug the power cord. Gently remove the battery from the battery holder and wait for one minute.
Gigabyte Technology GA-880GMA-UD2H, Socket AM3, AMD Motherboard
Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder, making them short for 5 seconds. Plug in the power cord and restart your computer.
Always turn off your computer and unplug the power cord before replacing the battery. Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with an incorrect model.
Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. Used batteries must be handled in accordance with local environmental regulations. To flash the BIOS, do it with caution.
Inadequate BIOS flashing may result in system malfunction. Refer to Chapter 5, "Troubleshooting," for the beep codes description. It is recommended that Gigabyte GA-880G-USB3 Easy Energy Saver not alter the default settings unless you need to to prevent system instability or other unexpected results. Inadequately altering the settings may result in system's failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values. For more information, refer to Chapter 4, "Xpress Recovery2.
Drivers and utilites for Gigabyte motherboards - choice of model.
The system will directly boot from the Gigabyte GA-880G-USB3 Easy Energy Saver configured in Boot Menu. The setting in Boot Menu is effective for one time only. You can access Boot Menu again to change the first boot device setting as needed. Help for each item is in the Item Help block on the right side of the submenu. When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults. You can create up to 8 profiles Profile and name each profile. MB Intelligent Tweaker M. Use this menu to configure the clock, frequency and voltages of your CPU, memory, etc.
Standard CMOS Features Use this menu to configure Gigabyte GA-880G-USB3 Easy Energy Saver system time and date, hard drive types, and the type of errors that stop the system boot, etc. Power Management Setup Use this menu to configure all the power-saving functions. Load Fail-Safe Defaults Fail-Safe defaults are factory settings for the most stable, minimal-performance system operations.
Load Optimized Defaults Optimized defaults are factory settings for optimal-performance system operations. Set Supervisor Password Change, set, or disable password.
|Philips SPD2412T||Have a question?|
|Lenovo ThinkCentre Edge 92 Realtek USB 2.0 Card Reader||**B Grade** GA-880GM-USB3 AMD 880G (Socket AM3+) DDR3 MicroATX Motherboard|
Set User Password Change, set, or disable password. A user password only allows you to view the BIOS settings but not to make changes.
Exit Without Saving Abandon all changes Gigabyte GA-880G-USB3 Easy Energy Saver the previous settings remain in effect. With the innovative GIGABYTE Easy Energy Saver technology, the GMA-USB3 is able to provide user friendly computing, reach the maximum system. With the innovative GIGABYTE Easy Energy Saver technology, the G-USB3 is able to provide user friendly computing, reach the maximum system.