ALLIED TELESIS AT-PBC18 DRIVER FOR WINDOWS MAC

ALLIED TELESIS AT-PBC18 DRIVER DETAILS:

Type: Driver
File Name: allied_telesis_13215.zip
File Size: 31.2 MB
Rating:
3.26
243 (3.26)
Downloads: 167
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now
ALLIED TELESIS AT-PBC18 DRIVER



Page 2 Copyright Allied Telesyn, Inc.

No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. Ethernet is a registered trademark of Xerox Corporation.

NEW DRIVER: ALLIED TELESIS AT-PBC18

All other product names, company names, logos or other designations Allied Telesis AT-PBC18 herein are trademarks or registered trademarks of Allied Telesis AT-PBC18 respective owners. Page 3: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Immunity EN Electrical Safety Page 5: Page 7: Page 8: Document Conventions Document Conventions This guide uses the following conventions: Note Notes provide additional information.

Allied Telesis AT-PBC18 Manuals

Caution Cautions indicate that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings indicate that performing or omitting a specific action may result in bodily injury.

Page 9: Page Ftp Server FTP Server If you need management software for an Allied Telesyn managed device and you know the file name of the software, you can download the software by connecting directly to our FTP server at ftp: The chassis can be used on a desktop or installed in aor inch rack. The front Allied Telesis AT-PBC18 the chassis has slots for PowerBlade modules along with six LEDs to notify you of power and management status. Allied Telesis AT-PBC18

  • NetDiscover MIB/OID - AT-PBC18 - 18 slot PowerBlade Media Chassis (MC)
  • PBC18 Allied Telesis
  • Allied Telesis AT-PBC18 Manuals
  • NetDiscover MIB/OID
  • Allied Telesis AT-PBC18 Quick Install Manual
  • Our Technology
  • Allied Telesis PowerBlade AT-PBC18 - modular expansion base Series Specs

PWR2 Green The Allied Telesis AT-PBC18 redundant power supply, if installed, is functioning normally. The expansion slot for the main power supply and the optional redundant power supply are located on the back of the chassis.

ALLIED TELESIS AT-PBC18 WINDOWS 10 DRIVERS DOWNLOAD

Refer to Figure 2. Verifying Package Contents Make sure the following items are included in your package. If any item is missing or damaged, contact your Allied Telesyn sales representative for assistance. Reviewing Safety Precautions Do not expose the chassis to moisture or water. Make sure it is in a dust-free environment. Use dedicated power circuits or power conditioners Allied Telesis AT-PBC18 supply reliable electrical power to the network devices.

Reviewing Safety Precautions Please review the following safety precautions before you Allied Telesis AT-PBC18 the chassis and the PowerBlade modules. The first warning applies only if you purchased a module with a fiber optic port. The air vents must not be blocked on the Allied Telesis AT-PBC18 and must have free access to the room ambient air for cooling. Caution Operating Temperature: For desktop installation, perform the procedure below: Remove all the items from the shipping package and store the packaging material in a safe location.

Allied Telesis AT-PBC18 Proceed to Step 6 on page 13 for further instructions. Note If you purchased an optional management module, install the module before applying power to the chassis. Page 22 c. Strip the three wires in the cable tray coming from the DC input power source to 8 millimeters 1 millimeters 0. Warning Do not strip more than the recommended amount of wire.

Allied Telesis PowerBlade AT-PBC18 - modular expansion base Series Specs - CNET

Stripping more than the recommended amount can create a safety hazard by leaving exposed wire on Allied Telesis AT-PBC18 terminal block after installation. Connect the negative feed wire to the terminal block marked - negative.

Warning Safety Hazard - Check to see if there are any exposed copper strands coming from the installed wires. It is recommended that you install the chassis in the rack before installing the PowerBlade modules. For rackmount installation, perform the following procedure: Remove Allied Telesis AT-PBC18 rubber feet from the bottom of the chassis, if attached, as shown in Figure It is recommended that you get assistance with the next step.

Allied Telesis PowerBlade - Modular expansion base - rack-mountable at Backoffice

Attach the chassis to the rack with 4 screws not provided for each side. See Figure Allied Allied Telesis AT-PBC18 modular PowerBlade™ system delivers a flexible the GBIC slot on Allied Telesyn GBIC compatible devices and PBC18 Chassis.

DOWNLOAD DRIVER: ALLIED TELESIS AT-PBC18

PWR1. PBC Notice: This product is no longer available for purchase. Technical Details Allied Telesis, Inc.

Brother HL-L2385DWMore information:
ASUS X450LA TouchpadInstallation guide

All rights reserved. United States.

Other Drivers