HP ENVY 23-D130ET TOUCHSMART SEAGATE HDD DRIVER DETAILS:
|File Size:||31.8 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* (*Free Registration Required)|
HP ENVY 23-D130ET TOUCHSMART SEAGATE HDD DRIVER
Transfer the computer to a clean, flat, stable work surface over a noncarpeted floor. HP recommends putting down a blanket, towel, or other soft cloth to protect the screen from scratches or other damage. Use an antistatic wrist strap and a conductive foam pad when working on the computer.
Replacing the Hard Drive in HP ENVY 23-d000/23se-d000 TouchSmart All-in-One Series Desktop PCs
Electrostatic discharge ESD can damage your processor, disk drives, expansion boards, and other components. HP strongly recommends the use of the wrist strap and conductive foam pad.
Remove a component from its protective packaging only when you are ready to install it. This product contains components that can be damaged by electrostatic discharge ESD. To reduce the chance of ESD damage, work over a noncarpeted floor, use a static dissipative work surface such as a conductive foam padand wear an ESD wrist strap connected to a grounded surface. Video overview View the following video before using the steps in this article.
Video overview View the following video before using the steps in this article. For best quality on dial-up connections, wait until the video has fully loaded before viewing.
Removing the hard drive Use these steps to remove the hard drive: Step 2 Loosen the captive Phillips screw that holds the hard drive in place. Step 3 Lift the hard drive handle and slide the cage to the side. Then lift it up and remove it from the computer. Step 4 Remove the four screws, two on each side of the hard drive cage.
Replacing the Hard Drive for HP Envy Recline 23 TouchSmart All-in-One PCs HP® Customer Support
Save the screws for hard drive replacement. Step 5 Slide the hard drive out of the cage.
Replacing the hard drive Use these steps to replace the hard drive: Step 1 Remove the access door. Step 2 Press down on the green release latch for the hard drive cage Step 3 Pull the hard drive cage out of the computer. Step 4 Remove the four screws, two on each side of the hard drive cage. Save the screws for hard drive replacement. Step 5 Slide the hard drive out of the cage.
Replacing the hard drive Use these steps to replace the hard drive: Step 1 To install a hard drive, slide the hard drive into the cage with the spindle side of the hard drive towards the open side of the HP ENVY 23-d130et TouchSmart Seagate HDD. Step 2 Secure the hard drive to the cage with four Philips head screws. This package provides a tool that will update the Seagate hard drive firmware.
Replacing the Hard Drive for HP Envy Recline 23 TouchSmart All-in-One PCs
This package is available for supported platforms that are running a supported. Use the steps in this document to help replace a hard drive in your computer. If you want to add a hard drive with more capacity (upgrade), you can upgrade to Missing: det Seagate.