MELLANOX MHGA28-1SC HCA CARD DRIVERS DOWNLOAD

MELLANOX MHGA28-1SC HCA CARD DRIVER DETAILS:

Type: Driver
File Name: mellanox_mhga28_23271.zip
File Size: 4.9 MB
Rating:
3.52
46 (3.52)
Downloads: 27
Supported systems: ALL Windows 32x/64x
Price: Free* (*Free Registration Required)

Download Now
MELLANOX MHGA28-1SC HCA CARD DRIVER



Card Product Label 12 Figure 4: I2C-compatible Connector 53 Figure 8: Connector Retention Clip 57 Figure Extracting Connector Clip 58 Figure Unscrew Bracket Screws 58 Figure Detach the Bracket in a Rotating Move 59 Figure Place Tall Bracket onto Card 60 Figure Attach Bracket onto Card using Screws 60 Figure Sliding Connector Clip Evenly 61 Figure Revision History Table 8 Table 6: Documents List 9 Table Mellanox MHGA28-1SC HCA Card Hardware and Software Requirements 13 Table LEDs 17 Table Jumper Configuration 19 Table It provides details as to the interfaces of the board, specifications, required software and firmware for operating the Mellanox MHGA28-1SC HCA Card, and relevant documentation.

MELLANOX MHGA28-1SC HCA CARD WINDOWS 7 X64 TREIBER

The manual assumes basic familiarity with the InfiniBand architecture specification. Firmware download Web page: The use of Mb small b indicates size in mega bits. The cards described in this manual have the following main features: The Mem-free HCA cards have a similar form and fit. The main visible difference is in the bracket height. SC Tall Bracket -? HCA cards of Mellanox MHGA28-1SC HCA Card same generation have a similar form and fit.

MELLANOX MHGA28-1SC HCA CARD DRIVERS FOR WINDOWS

The main visible difference is the bracket Mellanox MHGA28-1SC HCA Card. Please consult the host machine documentation for instructions on how to install a PCI Express card Installation Instructions as per Host Machine The adapter cards listed in Table 5 on page 12 are standard PCI Express cards each with a standard x edge connector. Please consult the host machine documentation for instructions on how to install a PCI Express card.

MELLANOX MHGA28-1SC HCA CARD TREIBER WINDOWS 7

Installation Instructions Read all installation instructions before connecting the equipment to the power source. Over-temperature This equipment should not be operated in an area with an ambient temperature exceeding the maximum recommended: Moreover, to guarantee proper air flow, allow at least 8cm 3 inches of clearance around the Mellanox MHGA28-1SC HCA Card openings. During Lightning - Electrical Hazard During periods of lightning activity, do not work on the equipment or connect or disconnect cables. Equipment Installation This equipment should be installed, replaced, or serviced only by trained and qualified personnel.

Mellanox InfiniHost III Ex HCA MHGA28-1TC InfiniBand PCIe Dual Port Adapter Card

Equipment Disposal Disposal of this equipment should be in accordance to all national laws and regulations. Local and National Electrical Codes This equipment should be installed in compliance with local and national electrical codes. Firmware is updated occasionally and the most recent firmware can be obtained from through the Firmware Downloads link. The HCA firmware Mellanox MHGA28-1SC HCA Card pages include the following firmware update options: This package is available for download, along with its user s Mellanox MHGA28-1SC HCA Card, from the single HCA card firmware update page.

See under Firmware Downloads. A firmware binaries table lists a binary file per HCA card. The file name of each such binary is composed by combining the firmware name, the firmware release version, and the card part number.

Currently, only the Linux distributions support updating firmware for an entire InfiniBand cluster. The procedure described in this section is normally not needed and applies to OEMs only. To create a customized firmware binary, the firmware image in MLX format needs to be downloaded along with the MFT tools package. See under Firmware Downloads for customized firmware update instructions. Connector 1 connects to Mellanox MHGA28-1SC HCA Card A of the device, while connector 2 connects to port B.

The data activity link yellow illuminates once the InfiniBand network is discovered over Mellanox MHGA28-1SC HCA Card physical link. The activity link is a steady yellow when it is discovered but no data is being passed. The activity link blinks when data is being passed. If the LEDs are not active, either the physical or the logical or both connections have not been established. Mellanox Technologies. Dual Port InfiniHost III Ex PCI Express HCA Cards Table.

Download Mellanox MHGASC rev.A2 HCA Card Firmware for OS Independent

OPN, Card Rev: PSID*, HCA Card x8 Short Bracket HCA Card, Dual 4X IB Port MT InfiniHost III Ex. MHGASC, Rev A4: MT_ Mellanox Technologies Ltd Mellanox HCA Cards Part Numbering Key. 12.

Table Specifications for MHGASC (MB, Short Bracket, IB @ DDR).

Other Drivers