Type: Driver
File Name:
File Size: 28.4 MB
25 (3.88)
Downloads: 13
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now

Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Use your left Asrock P43DE3L SATA2 index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center Asrock P43DE3L SATA2 PnP cap to assist in removal. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.

Step 4. Close the socket: Rotate the load plate onto the IHS.

While pressing down lightly on load plate, engage the load lever. Secure load lever with load plate tab under retention tab of load lever. Before you installed the heatsink, you need to Asrock P43DE3L SATA2 thermal interface material between the CPU and the heatsink to improve heat dissipation.

Ensure that the CPU and Asrock P43DE3L SATA2 heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Apply thermal interface material onto center of IHS on the socket surface. Place the heatsink onto the socket. Align fasteners with the motherboard throughholes.

Drivers, BIOS, firmwares et utilitaires classés par marques et par catégories de matériel

Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners. If Asrock P43DE3L SATA2 press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Step 6. Connect fan header with the CPU fan connector on the motherboard.

For ASRock P43DE3L Original Used Desktop P43 Motherboard LGA775 DDR3 16G SATA2

Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. For dual channel configuration, you always need to install identical the same brand, speed, size and chiptype DDR3 DIMM pair in the slots of the same color. If you want to install two memory modules, for optimal compatibility Asrock P43DE3L SATA2 reliability, it is recommended to install them in the slots of the same color.

Unlock a DIMM slot by pressing the retaining clips outward. PCI Slots: PCIE Slots: Installing an expansion card Step 1. Before installing the Asrock P43DE3L SATA2 card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Fasten the card to the chassis with screws. Replace the system cover. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off Asrock P43DE3L SATA2 computer and unplug the power cord from the power supply.


Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Please refer to the instruction of your IDE device vendor for the details. Each USB 2. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. Infrared Module Header 5-pin IR1 see p. Internal Audio Connectors 4-pin CD1 see p. P43DE3L. Solid Capacitor for CPU Power; Supports FSB MHz CPUs Asrock P43DE3L SATA2 x SATA2 Gb/s connectors, support NCQ, AHCI and Hot Plug functions. P43DE3.


Compatible with all FSB /// MHz CPUs; Supports Dual 6 x SATA2 Gb/s connectors, support NCQ, AHCI and Hot Plug functions.

Other Drivers