Type: Driver
File Name:
File Size: 9.3 MB
100 (4.38)
Downloads: 67
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now

Your friends Asrock H61M-GE Boot can load the OC profile to their own system to get the same OC settings. In IES Intelligent Energy SaverAsrock H61M-GE Boot voltage regulator can reduce the number of output phases to improve efficiency when the CPU cores are idle without sacrificing computing performance. ASRock website: Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without prepar- H ing an additional floppy diskette or other complicated flash utility. With APP Charger driver installed, you can easily enjoy the marvelous charging experience than ever.


SmartView, a new function of internet browser, is the smart start page for IE that combines your most visited web sites, your history, your Facebook friends and your real-time Asrock H61M-GE Boot into an enhanced view for a more personal Internet experience. ASRock motherboards are exclusively equipped with the SmartView utility that helps you keep in touch with friends on-the-go.

( SUCCESS ! ) Asrock H61M-DGS / Geforce GT 610 / Intel Celeron G1620

The performance may depend on the property of the device. While Asrock H61M-GE Boot overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again.

Sony Vaio VPCF224FXB Image OptimizerAdded to Cart
Acer N-30N3Shop with confidence
Asrock K8Upgrade-PCIE SiS Ethernet DeviceSpecifications
420i520i PCL UniUser Manual

To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Combo Cooler Option C. Please be noticed that not all the and CPU Fan can be used. EuP, stands for Energy Using Product, was a provision regulated by European Union to Asrock H61M-GE Boot the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1. For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.

ASRock > H61M-GE

Installation Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching Asrock H61M-GE Boot component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.


Hold components by the edges and do not touch Asrock H61M-GE Boot ICs. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Open the socket: Step Disengaging the Asrock H61M-GE Boot by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees. Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.


This cap must be placed if returning the motherboard for after service. Step 3.

Insert the Pin CPU: Hold the CPU by the edges where are marked with black lines. Locate Pin1 and the two orientation key notches.

Problems with PC Overhaul *** ASRock H61M-GE****

Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys.

Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.

Secure load lever with load plate tab under retention tab of load lever. Below is an example to Asrock H61M-GE Boot the installation of the heatsink for Pin CPU. Step 1. Apply thermal interface material onto center of Step 2.

H61M-GE. Solid Capacitor for CPU Power; Supports Intel® K-Series CPU; Supports Supports AXTU, Graphical UEFI, Instant Boot, Instant Flash, APP Charger. ASRock H61M-GE LGA Asrock H61M-GE Boot H61 HDMI Micro ATX Intel I carefully installed everything and upon the first boot, the fans and hard drive.

Other Drivers