Type: Driver
File Name:
File Size: 28.5 MB
98 (4.34)
Downloads: 73
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now

Important Note: Read and follow the instruction inside the BIOS screen. It is under the Utility section of the driver disc. To see all 5 drives, you would need to be inside the Addonics ADS3GX4R5-E system disk utility. Source Exif Data: File Type: No XMP Toolkit: Adobe XMP Core 5. Binary data Addonics ADS3GX4R5-E, use -b option to extract Instance ID: Just proceed to Software Installation section directly. Press Enter.

Addonics Technologies Ads3Gx4R5 E Users Manual E_user_guide

Addonics ADS3GX4R5-E Select Stripe then press Enter. Select Auto configuration or manually select the drives Press Enter. Press Y to save your settings.

Your RAID configuration is complete. Please proceed to software installation section.

Select Mirrored then press Addonics ADS3GX4R5-E. Select Auto configuration or manually select the drives. After the Raid 1 set is created then click on Create Raid Set again.

Press Create the spare drive. Select the drive to be the spare. Press Ctrl-E then Y to exit the setup.

Addonics ADS3GX4R5-E 1 must be created first before spare drive can be created. If the set being deleted is a Mirrored set, then the data will remain intact and accessible on both drives. Select rebuilding Mirrored set.

Addonics Ads3gx4r5-e Pci-x SATA RAID Controller 4x eSATA

Select Online rebuild or Offline rebuild. Answer Y to rebuild the Mirrored set of hard drive.


If, after a disk failure, the replacement disk was previously part of a RAID set or used in another systemit may have conflictin Addonics ADS3GX4R5-E metada ta, specifically in reference to the dr ive connection information. If so, this will prohi bit the RAID set from being either created or rebuilt, In order for the RAID set to function properly, this old metadata must be first overwritten with the new metadata. To resolve this, select Resolve Conflicts, and the correct metadata, including the correct drive connection information; will be written to the replacement disk. To do a fresh install of Windows, your hard drive must be connected to Port 1 of the host controller.


To Addonics ADS3GX4R5-E a fresh install of Windows, your hard drive must be connected to Port 1 of the Port Multiplier. Open the Addonics Technologies Driver Disk. Click Browse and select My Documents. Select the folder with your corresponding Addonics ADS3GX4R5-E system and extract the file to the floppy diskette.

  • Addonics ADS3GX4R5-E
  • Addonics Computer Components & Parts for sale eBay
  • Addonics Product: 4-Port eSATA II RAID5/JBOD PCI-X Controller
  • Login or create an account
  • Write a review
  • Addonics Technologies Ads3Gx4R5 E Users Manual E_user_guide

Hardware Installations: Remove PC cover. Makes sure to secure the bracket with a screw. Power ON your PC. If using a driver that has not been digitally signed by Microsoft, you will be asked if you want Addonics ADS3GX4R5-E continue the installation.

Addonics Technologies Ads3Gx4R5 E Users Manual E_user_guide

Click Continue. When Addonics ADS3GX4R5-E new hardware wizard has finish installing the Serial ATA card. Right click the My Computer icon and select Manage. Designed to the latest 3Gbits/sec ASIC from Silicon Image and eSATA connector, this 4-port controller incorporates many advanced features that are only found. Model: ADS3GX4R5-E. SPECIFICATIONS. Chip Set: Silicon Image Sil Integrated Host.


Controller. Interface: PCI/PCI-X bus compatible. I/O Ports: (4) eSATA.

Other Drivers